沖壓機械手操作注意事項

沖壓機械手看見非常簡單，便是銅鐵和鋼鐵塑造的，但是，一臺沖壓機械手的產品研發定制是通過成千上萬次的，新形勢下越來越多都將由智能機器人慢慢取代，并且這還會慢慢的普及化下來，逐漸融入大家的日常生活。自動化生產深深的融入各行各業，生活可能更為方便，特別是沖壓機器人、沖壓機械手、塑料機智能機器人也是變成了工廠的一部分。

Stamping nipulator looks very , is copper and copper iron built, however, a stamping nipulator R & amp; d customization is after thousands of tests, the new nor l under more and more traditional nufacturing enterprises will be gradually replaced by robots, and this will slowly popularize, gradually integrated into peoples daily life. Auto ted production is deeply integrated into all fields, life will be more convenient, especially stamping robots, stamping nipulators, injection molding chine robots have become part of the factory.

伴隨著“中國制造業2025”的提起和“互聯網技術 ”的普及化，許多地方的工廠都進行了“智能制造”，不過在實際操作沖壓機械手的過程中或是有許多需要注意的位置，今天我們就來和我們講講沖壓機械手實際操作常見問題。

With the proposal of "Made in China 2025" and the Popularization of "internet", factories in ny areas have carried out " chine replacement", but in the operation of stamping nipulator There is still a lot to pay attention to, today we come to talk to you about stamping nipulator operation precautions.

在實際操作上下料機器人以前一定要注意查驗電器控制箱內是不是存水、油進到，若家用電器返潮，切忌啟動，而且要檢查供電電壓是不是合乎，前后左右安全門開關是否正常。認證電動機的轉角度是不是一致，隨后開啟開關電源。在沖壓機械手必須拆掉的情況下，在其中對關閉射出機開關電源；關閉機械臂開關電源；關閉機械臂標準氣壓源。

Before operating the loading and unloading robot must pay attention to check the electrical control box whether there is water, oil into, if the electrical appliances damp, do not turn on, and to check whether the supply voltage is in line with, before and after the safety door switch is nor l. Verify that the turn direction of the motor is consistent, and then turn on the power supply. When the stamping nipulator needs to be removed, it turns off the ejection electromechanical source, turns off the nipulator power supply, and turns off the nipulator air pressure source.

洩除空壓，釋放壓力引拔汽缸固定板固定螺絲，并挪動胳膊，挪動油壓緩沖器座，使之挨近胳膊。旋緊引拔汽缸固定板，讓胳膊不可以挪動，將轉動安全性螺絲鎖好，使機械臂不可以轉動等，那些小細節層面的難題都應該留意。

Remove the air pressure, relax the pull-out cylinder fixing plate fixing screws, and move the arm to move the buffer seat so that it is close to the arm. Tighten the drawing cylinder fixing plate, so that the arm can not move, will rotate the safety screws lock, so that the nipulator can not rotate, and so on, these details of the problem should be noted.

杭州市是一家致力于沖床機械手,上下料機械手,五金沖壓機械手，工業機械手，非標機械機器設備的開發生產和銷售于一體的高新技術生產商。

文中關鍵字：沖壓機械手實際操作常見問題